The System

Certified control boxes

Water resistant smart controllers

Why certified control boxes matter

The control box is the single most common area where installers cut corners to save money. An uncertified control box is not just a quality issue. Using uncertified electrical products can void your business insurance and void your home warranty if something goes wrong with the box itself. This is not a theoretical risk. It is a documented liability that homeowners and contractors should take seriously before choosing a cheaper system.

Certified

GOULY Pro Control Box

GOULY certified control box showing UL listed controller, organized wiring, fuse board, and sealed IP68 enclosure
  • UL and cUL listed (File E483482)
  • Suitable for Wet Locations
  • Organized, colour-coded wiring
  • Fuse and short circuit protection
  • Class 2 isolated power supply
  • Brass weatherproof cable glands
  • Water resistant with one way air caps

Uncertified

What budget installers often use

Uncertified control box with loose wiring, no fuse protection, and exposed connections
  • No UL or cUL safety listing
  • Exposed and loose wiring
  • No fuse or overcurrent protection
  • No proper cable management
  • Voids business insurance if failure occurs
  • Voids home warranty if damage occurs
  • Open gaps for water entry

12 safety standards

What a certified control box actually protects

Every one of these standards exists because real systems have failed without them. This is what separates a professional install from a liability.

1

UL Certified and Fully Tested

What it means

Our lighting system has been independently tested and certified to meet strict North American safety standards.

Why it matters

This ensures protection against electrical hazards, fire risks, and system failures. You are not relying on manufacturer claims, you are backed by verified third-party testing.

2

Water Resistant Design (Made for Wet Locations)

What it means

Built to withstand direct exposure to rain, snow, and harsh outdoor conditions.

Why it matters

Outdoor lighting failures almost always come from water intrusion. A proper wet-location design helps prevent short circuits, corrosion, and long-term damage, giving you reliable year-round performance.

3

Sealed and Protected Electronics (Full Encapsulation)

What it means

Internal components are fully sealed and protected inside the fixture.

Why it matters

This prevents moisture, dust, and debris from ever reaching sensitive electronics, dramatically reducing failure rates and increasing lifespan.

4

Low Voltage Safety System

What it means

Operates on safe low-voltage DC power instead of high-voltage electrical current.

Why it matters

Greatly reduces the risk of electrical shock and fire, making it safe for homes, families, and outdoor environments.

5

Built-In Circuit Protection (Fuse + Short Circuit)

What it means

The system includes internal protection that automatically shuts down in unsafe conditions.

Why it matters

If there is ever a fault, overload, or wiring issue, the system protects itself, preventing damage, overheating, or fire hazards.

6

Temperature and Heat Resistance

What it means

Components are designed to operate safely in extreme temperatures and high heat conditions.

Why it matters

Outdoor lighting faces extreme weather swings. Heat-resistant materials prevent warping, failure, or safety risks over time.

7

Fire-Resistant Materials

What it means

Constructed with flame-rated materials designed to resist ignition and slow fire spread.

Why it matters

Adds an extra layer of protection in the rare event of an electrical issue, helping protect your home and property.

8

Corrosion and UV Resistance

What it means

Materials are treated to resist rust, sun damage, and long-term environmental wear.

Why it matters

Prevents cracking, fading, and structural breakdown, ensuring your system stays safe and looks good for years.

9

Waterproof Connection System

What it means

All connections are sealed and designed to prevent water entry at critical points.

Why it matters

Most lighting failures happen at connection points. Waterproof connectors eliminate this weak spot and ensure consistent performance.

10

Isolated Power Supply (Class 2 Safety)

What it means

Uses a regulated, isolated power system that limits electrical output to safe levels.

Why it matters

Prevents dangerous current levels and protects both the system and your home from electrical faults.

11

Parallel Circuit Design (Failure Isolation)

What it means

Each light operates independently within the system.

Why it matters

If one light fails, the rest continue working. This prevents full system outages and makes maintenance easier.

12

Installation Safety Standards

What it means

Designed with strict installation requirements for proper wiring, mounting, and operation.

Why it matters

Ensures the system is installed safely and performs as intended, reducing risk caused by improper setup.

Certified hardware

Do not let the control box be the weakest link in your system

The control box powers everything. If it is not certified, tested, and properly sealed, it puts your lights, your home, and your coverage at risk. Ask your installer to show you the UL listing. If they cannot, ask why.

Support

Frequently asked questions

Five common GOULY LED Lighting System questions below. For app, install, billing, and the full list, use the FAQ page.

Open full FAQ page

GOULY LED Lighting System

GOULY LED Lighting was founded in 2011 and has proudly delivered excellence for 15 years. While the majority of our competitors have been in business for less than a decade, our depth of experience sets us apart.

Read more

Depending on the complexity of the project, our team will quote a fair market rate. We charge by the project rather than linear footage for fair pricing. to find out your cost.

Read more

We install GOULY Outdoor Lighting Systems built on Gen 3 Lighting, the current generation platform for permanent outdoor LEDs and the GOULY app.

Read more

Gen 3 Lighting is GOULY's current generation permanent outdoor LED platform: the tracks, LEDs, and control system we install. It works with the GOULY app for patterns, colours, schedules, and zones.

Read more

Yes, the lighting system is waterproof and rated IP68 to ensure there are no issues if the system ever comes in contact with water.

Read more

Ready for a system that matches your home?

Get a free quote for permanent LED lighting in Calgary, Chestermere, Langdon, Okotoks and Strathmore, or browse the gallery for real installs.

Join the team

We're hiring. Come work with us

Explore careers or become a dealer.

Work with Us