Hat Track Premium Aluminum LED Lighting Channel

Made in Calgary. Engineered for Alberta homes.

The Hat Track is a custom aluminum extrusion designed and manufactured right here in Calgary, specifically for permanent, professional-grade roofline LED lighting. It installs discreetly below the fascia board and becomes an integrated part of your home's architecture instead of looking like an add-on.

When the lights are off, you see a clean, colour-matched roofline. When they are on, you get smooth, even, vibrant illumination designed to last for years.

Every detail is engineered for Calgary conditions, including freeze-thaw cycles, Chinook winds, heavy snow, and rapid temperature changes.

IP68 durability

Moisture and freeze-thaw ready

100+ colours

Precise fascia colour matching

Calgary made

Engineered for Alberta homes

Hat Track colour matched rails with integrated LED modules

Engineering sections

Full Hat Track feature breakdown

Made in Calgary, Built for Calgary

Every Hat Track is extruded, finished, and colour-matched locally in Calgary. Local manufacturing gives faster turnaround, stronger quality control, and a product engineered from the start to survive Alberta winters and unpredictable weather.

Local fabrication flow

Colour MatchExtrudeFinish

Calgary fabrication sequence with local quality control.

Premium aluminum construction

Made from high-grade, corrosion-resistant aluminum, Hat Track is strong, lightweight, and built for decades. Unlike plastic or thin-metal alternatives, it resists warping, cracking, and sagging under UV exposure and extreme temperature swings.

Material stress resistance

UVSnowWind

Rigid aluminum profile designed for weather stress.

Perfect colour matching over 100 colours

We precisely colour-match the track to your existing fascia using a palette of over 100 colours. When the lights are off, the channel blends in so your roofline keeps its original appearance without visible hardware.

Colour match blend

Track finish selected to blend with fascia tones.

30mm precision clip-in openings

The Hat Track uses engineered 30mm openings that let Puck LED Gen 3 and Singular LED modules clip firmly and cleanly into place. This keeps modules flush with stable hold in Alberta wind and snow while still making installation and future servicing straightforward.

Clip-in geometry

30mm Hat Track openings with puck positions

30mm openings with secure clip-in LED seating and clean spacing alignment.

Why 9 Inch Spacing is Critical on Puck LED 24V

Our 24V system is significantly brighter than standard 12V pucks, delivering up to 2x light output with richer colour. That higher output gives better coverage, but it also means light travels farther and can overlap more aggressively if spacing is too tight.

If pucks are closer than 9 inches, colour beams can bleed and wash together.
Green beside blue can blur into an unwanted cyan or teal blend.
Red beside blue can create a purple haze instead of clean colour separation.
9 inch spacing is engineered so each puck beam stays defined while still delivering smooth roofline coverage.

9 inch spacing control

9 in9 in

9 inch spacing keeps beams defined and avoids muddy colour overlap.

Discreet below-fascia installation

The track installs neatly below the fascia board. One side sits tight against fascia for a flush fit while the opposite side is screwed from the soffit, creating a straight, locked-in lighting line with clean wire and fastener access.

Fascia and soffit alignment

Discreet below-fascia installation with colour-matched track and LED pucks on soffit

Below-fascia placement keeps the track discreet with a straight roofline finish.

Fully concealed wiring

Power wires, connections, and components run hidden inside the channel from end to end. No dangling cords or exposed hardware, just a clean architectural finish.

Concealed path routing

Concealed wiring inside Hat Track channel with inline connection

Power and connections stay concealed inside the track with no exposed cords.

Easy access and long-term serviceability

The design intentionally keeps fasteners and wiring accessible from below. That makes installation efficient today and keeps future maintenance or upgrades quick and practical from a ladder.

Service access point

FastenersAccessWiring

Access from below simplifies future service and upgrades.

GOULY LED Lighting System

GOULY LED Lighting was founded in 2011 and has proudly delivered excellence for 15 years. While the majority of our competitors have been in business for less than a decade, our depth of experience sets us apart.

Depending on the complexity of the project, our team will quote a fair market rate. We charge by the project rather than linear footage for fair pricing. to find out your cost.

We install GOULY Outdoor Lighting Systems built on Gen 3 Lighting, the current generation platform for permanent outdoor LEDs and the GOULY app.

Gen 3 Lighting is GOULY's current generation permanent outdoor LED platform: the tracks, LEDs, and control system we install. It works with the GOULY app for patterns, colours, schedules, and zones.

Yes, the lighting system is waterproof and rated IP68 to ensure there are no issues if the system ever comes in contact with water.

LED Track Lighting

Hat Track Premium Aluminum LED Lighting Channel

Off: invisible architecture. On: smooth vibrant output.